Evido EAD-D2000 Manual descarregar pdf (Página 89)

If your system still keeps rebooting at Safety Mode even with the steps of above?

It means some parts of your firmware files on the device are damaged and not available any

more. Please try the steps of below to recover the firmware file.

1. Run the IPAdminTool.exe program. Then, you may find that your encoder or IP

camera is with ‘Safety Mode’ on the IPAdminTool as below.

2. Right-click at the device name and select the ‘Update’ menu.

Note

Please find the detailed instruction at the ‘EAD-series IPAdminTool.pdf’ to know

how to update firmware. The section ‘3. Updating Firmware’ will guide you to

understand the updating procedure.

If you have completed the firmware update, you can access the webpage and check out if your

system boots in a normal booting mode.

Though it varies by operating the system, typically the safe mode loads as few executable

modules as possible and usually disables normal working of device.

Available functions

IP change by IPAdminTool

Scanning by IPAdminTool

Searched by UPnP program

Limited functions

RTSP or HTTP streaming

Event messages or alarming

Recognition of HTTP API commands

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 95 96

Sem comentários

Evido EAD-D2000 Manual Página 89